- Other Lights & Lighting Products[2]
- Energy Saving Equipment[9]
- Other Metal Processing Machinery[7]
- Chemical Product Machinery[1]
- Glass Processing Machinery[1]
- Floorboard Making Machinery[1]
- Vacuum Cavitation System[3]
- Flashlights & Torches[1]
- Drying Equipment[10]
- Other Construction Material Making Machinery[1]
- Other Woodworking Machinery[10]
- Printing Machinery[1]
- Machinery Processing Services[2]
- Other Electrical Equipment[1]
- Electric Heater Parts[7]
- Plastic Processing Machinery Parts[2]
- Machinery Parts Processing Services[1]
- Ultraviolet Lamps[6]
- Metal Halide Lamps[4]
- Quartz Tubes[1]
- Halogen Bulbs[7]
- Chemical Process Equipment Parts[2]
- Other Optics Instruments[2]
- Other Physical Measuring Instruments[1]
- Optical Filters[1]
- Other Electronic Measuring Instruments[1]
- Testing Equipment[3]
- Capacitors[2]
- Transformers[6]
- Storage Batteries[1]
- Lamp Covers & Shades[2]
- Plastic Product Making Machinery[1]
- Research & Development Services[1]
- Bag Making Machinery Parts[1]
- Christmas Decoration Supplies[9]
- Contact Person : Ms. Huang Judy
- Company Name : Shenzhen Sunkun Technical Co., Ltd.
- Tel : 86-755-28996592
- Fax : 86-755-28995058
- Address : Guangdong,ShenZhen,AiLian Industrial area,LongGang district
- Country/Region : China
- Zip : 518116
UV curing quanlity control meter
Introduction:
The Integrator140 is a high quality UV measuring instrument with handle.
The Integrator is used to measure UV energy of different light sources, especially on printing machines. It is ideal to ensure quality control of printing and drying processes.
It is measuring an integral in the spectral range from 250-410 nm.
By addition of the incidence of the light quantities during the UV exposure cycle, relative values are calculated.
Because of uneven radiation distribution of the UV light source and different type of construction of the measuring devices by different manufacturers, different readings
may appear under the same measurement conditions.
Instruction for use:
1.Switch on the UV-Integrator. display will show 0.
2.Place the UV-Integrator with the front facing the conveyor belt. sensor is on the back of the UV-Integrator.
The back plate of the UV-Integrator serves as the heat shield.
3.After the UV-Integrator has passed through the conveyor, take the UV-integrator from the conveyor belt in order to read the measuring result. measuring results are shown as: mJ/cm2.
4.Prior to a new measuring sequence, it is necessary to switch off and then on again. It will reset display 0 automaticallly.Continue as described in Step 2.
Attention:
1.Please avoid shaking the UV-Integrator
2.UV-light is hazardous to your health. Avoid direct UV-light to your eyes and to your body.
Technical Data:
Spectral range: UV 250-410 nm
Measuring range: 0 to 5,000mW/cm2
Display range: 0 to 999,999mJ/cm2
Power source: Long life 3.6 V lithium Battery
Power consumption: 100 μA
Battery service life: one year
Dimensions: 140mm φ,13mm height
Weight: Approx.450 gr.
Temperature range: 0 to 45°Celcius
While on the conveyor belt, Integrator 1401 can withstand max. 110°Celcius no more than 10 seconds.
UV curing quanlity control meter
